loader

LEED CONTRIBUTION

Complete Roof Cooling Insulation & Waterproofing Solutions

Panache provides with cooling solutions for all type of roofs& all type of materials – Flat & Slant Roofs; INDUSTRIAL CORRUGATED ROOFS; metal, concrete, wood etc.

  • Panache’s Cool Roofs: Highly Reflective, High Albedo Cool Roofing System comprises of application of layers of coating with – (MX Cool Guard + Mx Cool Top + Tran Seal)
  • Over Deck Insulation: CIS Roofing System (Cool Insulated Sustainable Roofing System), (CIS Roofing System of Panache provides with Waterproofing on RCC + Insulated Screeding + Chemical Waterproofing at different levels of system + Cool Roofing)
  • Waterproofing & Cooling: Chemical Waterproofing & Cooling system

Credits & points contribution by Panache Products for LEED Rating!

Interior Wall

    • Value Proposition: Low VOC and High LRV
    • Product Name: Sheen Wrap
    • Application Scope: All types of interior walls
    • 89% LRV (Light Reflectivity value: determines brightness in room)
    • Higher LRV implies: In case of sensor based lighting, energy efficient and in case of normal lighting one might have to switch on lights later in the evening thus leading to energy savings
    • Green Rating Specification
      • Use paints with low VOC content to the extent of 100% of interior wall surface area.
    • Point in IGBC: (LEED India NC-2011, IEQ Credit 3.2, page no -79 ) : 1 point
    • Point in GRIHA: GRIHA Manual 1, Preamble -40
    • ECBC Directive: 7.3.1 Interior lighting power ( ECBC User guide April 2011)

Exterior Wall Coating

  • Value Proposition: Low VOC, High SRI (Solar Reflectivity Index), Reduce heat Island effect
  • Product Name: Cool Wrap
  • Application Scope: All Exterior Walls
  • For green buildings Specification: SRI > 75
  • Tested At
    • Singapore TUV Test: SRI 107
    • Ahmedabad (CEPT): SRI 109
  • Silicone technology – better adhesive; better algae – fungus resistance; better dust repellence & water repellence.
  • Elastomeric property adds to prevent crack development.
  • Nano technologic components lead to better UV resistance & UV stability.
  • Water base formulations add value to preserve environment.
  • Warranties offered by Panache: 3 -5 years (life is > 5 years)
  • Competing companies offer warranty ranging from 2-5 years
  • No quantitative parameter available at this point to quantify durability. Practical site exists since 7 – 8 yrs.
  • Green Rating
    • Reduce heat Islands to minimise impact on microclimate
    • Increase thermal comfort of the occupant
  • Point in IGBC: Heat Island Effect (LEED 2011 NC- SS credit 7.2 – page 32,10) : 1 point
  • Point in IGBC: For Thermal Comfort (Credit 6 – point 1; page: 46)
  • Point in GRIHA: GRIHA Manual 1, Preamble -40
  • ECBC Directive: 4.3.2 Wall ( ECBC User guide April 2011)

Salt Resistant Primer

  • Value Proposition: Low VOC , dampness resistant & salt efflorescence resistant primer
  • Product Name: Seal Prime
  • Application Scope: Below interior wall & exterior wall paint
  • Salt resistance implies: Reduced paint peel off , reduced repaint , renovation cost
  • Green Rating Specification
    • Use products with low VOC content to the extent of 100% of interior wall surface area.
  • Point in IGBC: (LEED India NC-2011, IEQ Credit 3.2, page no -79 ) : 1 point
  • Point in GRIHA: GRIHA Manual 1, Page No -40
  • ECBC Directive: 7.3.1 Interior lighting power ( ECBC User guide April 2011)

Panache’s Cool Roof System

  • Mx Cool Guard – Base Coat
  • Mx Cool – Reflective Top Coat
  • TranSeal – Top Most Dust Repellent Coat
  • Value Proposition: High SRI (Solar Reflectivity Index), Reduce heat Island effect
  • Product Name: Mx Cool Guard; Mx Cool Top; TranSeal.
  • Application scope: All types of Roof – flat, slant, corrugated, cement, metal, asbestos.
  • For green buildings: SRI > 75
  • Tested At
    • Singapore TUV Test: SRI 107
    • Ahmedabad (CEPT): SRI 109
  • Silicone technology – better adhesive; better algae – fungus resistance; better dust repellence & water repellence.
  • Nano technologic components lead to better UV resistance & UV stability.
  • No quantitative parameter available at this point to quantify durability; Practical site exists since 7 – 8 yrs.
  • Green Rating specification
    • Optimise energy efficiency of the building by reducing AC consumption thus conserving energy
    • Reduce heat Islands to minimise impact on microclimate
  • Point in IGBC: For NC Building ( LEED 2011 NC- SS credit 7.2 – page 32 ) : – 1 point
  • Point in IGBC for Factory: ( LEED 2011 NC- EC credit 2 – page 46 ) : – up to 6 point ( saving 10%, 12.5%,15% and 17.5% then point is 3,4,5,6 respectively )
  • Point in IGBC: Heat Island Effect (LEED 2011 CS – credit 7.2 – page 10) : 1 point
  • Point in GRIHA: GRIHA Manual 1, Preamble -35
  • ECBC Directive: 4.3.1.1 Cool Roofs (ECBC User guide April 2011)

INSULATION – CIS Roofing System – (Cool Insulated Sustainable Roofing System)

  • Value Proposition: Reduced U value of composite with reduced conductivity of the insulated mortar & the system implicated.
  • Product Name: Insul Mix
  • Application Scope: Installation above RCC for insulation, waterproofing and cooling
  • For green buildings: You value of roof composite < 0.50 w/ m2 K (In IGBC) and for ECBC <0.40
  • Tested At
    • Nirma University ( Ahmadabad )- K Value of insulmix – 0.087 w/ M-k
  • Green Rating
    • Optimise energy efficiency of the building by reducing AC consumption to reduce environmental impacts from excessive energy use.
    • Performance based approach ( Include Building energy simulation results, U value of roof assembly, wall assembly, lighting power density)
  • 12%, 14%, 16% 18%, 20%, 22 %, 24% ….48 % base case –then point is 1 to 19 respectively.
  • Point IN IGBC: (LEED India NC 2011, EA Credit 1, Page No- 49): Up to 1-19 point
  • Point in GRIHA: GRIHA Manual 1, Preamble -35
  • ECBC Directive: table 4.4 Roof assembly (ECBC User guide April 2011)

 Waterproofing

  • Value Proposition: Low VOC
  • Product Name: Sealing slurry
  • Application Scope: vertical and horizontal area.
  • Elastomeric polymerized water proofing coating
  • Green Rating Specification
    • Use paints with low VOC content to the extent of 100% of wall and roof surface area.
  • Point in IGBC: (LEED India NC-2011, IEQ Credit 3.2, page no -79): 1 point
  • Point in GRIHA: (GRIHA Manual 1, Page No -40)

Regional Material Availability

  • Green Rating: Ensure at least 20% of the total building materials by cost used in the building should have been manufactured within in radius of 400 km.
  • Point IN IGBC: (LEED India NC 2011- MR Credit 5, Page No. -65 )Up to 2 point

Water Base Wood Finishes

  • Value Proposition: Low VOC / water base
  • Product Name: Timber Seal EP
  • Timber PU Coat
  • Timber Seal PU Coat
  • Timber Conditioner
  • Application Scope: All wood structures – interior & exterior
  • Green Rating Specification
    • Use paints with low VOC content to the extent of 100% of wall and roof surface area.
    • Point in IGBC: (LEED India NC-2011, IEQ Credit 4 Low-Emitting Materials 1 point, Page No: XVI – Page 44)
    • Point in GRIHA: (GRIHA Manual 1, Page No -40)