The demand for energy-efficient and sustainable buildings is on the rise. One of the ways to achieve this is by using cool surface coatings. These coatings have the ability to reflect sunlight and reduce heat absorption, thereby reducing energy consumption and improving indoor comfort.
Cool surface coatings are designed to reflect sunlight and reduce heat absorption, thereby lowering the surface temperature. This can be achieved through various methods, such as using reflective pigments, coatings with high solar reflectivity and emissivity, and using coatings that prevent heat transfer.
. These pigments reflect the sun’s rays back into the atmosphere, preventing them from being absorbed by the building’s surface. This reduces the surface temperature and the amount of heat that is transferred to the building’s interior. hhhhhhhh
High solar reflectivity and emissivity coatings are designed to reflect solar radiation and emit thermal radiation, which helps to reduce the temperature of the building’s surface.
Another method of reducing heat absorption is by using coatings that prevent heat transfer. These coatings use advanced technology, such as infrared reflective pigments and nano-particle insulation, to prevent heat transfer. This helps to reduce the amount of heat that is transferred from the outside of the building to the interior, thereby reducing the need for air conditioning.
Cool surface coatings not only help to reduce energy consumption but also improve indoor comfort. By reducing the surface temperature of a building, reflecting coatings can help to create a more comfortable living or working environment. This is particularly important in hot climates where the heat can be unbearable without air conditioning.
Reflecting coatings can be applied to a variety of surfaces, including roofs, walls, and even pavements. This makes them a versatile solution for reducing energy consumption and improving sustainability in buildings.
One of the main benefits of cool surface coatings is their ability to reduce
One of the main benefits of cool surface coatings is their ability to reduce the urban heat island effect. The urban heat island effect is a phenomenon where cities are warmer than surrounding rural areas due to the absorption of heat by buildings and pavement. Cool surface coatings can help to reduce this effect by reflecting sunlight and reducing heat absorption, thereby lowering the temperature of urban areas.
In addition to reducing energy consumption and improving indoor comfort, cool surface coatings also have environmental benefits. By reducing the need for air conditioning, these coatings can help to lower greenhouse gas emissions and reduce the carbon footprint of buildings. This makes them an important tool for combating climate change and promoting sustainability.
In conclusion, reflecting coatings are an effective way to reduce energy consumption and improve sustainability in buildings. By reflecting sunlight and reducing heat absorption, these coatings can lower surface temperatures, improve indoor comfort, and reduce the urban heat island effect. With the increasing demand for sustainable and energy-efficient buildings, cool surface coatings are likely to become more widely used in the future. As we continue to face the challenges of climate change and rising energy costs, reflective coatings offer a simple yet effective solution for reducing energy consumption and contributing to a cleaner and healthier environment.
Cross complemented product and services providers can be enrolled under this partnership program (Roofing contractor, HVAC contractors, HVLS Fans supplier)Know More
Any individual from consultation fraternity to execution contractors can participate in such a program.Know More
DSA (Direct selling Agent) partnership program provides opportunities to become entrepreneur in COOL ROOFING industries to each and every individual who wants to make their career as freelancers.Know More
I really appreciate Neetu ma’am and the panache Team for giving us a perfect solution to the heat related problems we experienced.
Before the application of cool tops, the temperature level on the store was 52 ° C, but after the application of Cool tops there seemed a reduction in surface temperature by 4 ° C, the temperature in the area where I sit was 40 °C which has reduced to 37 °C, there is a substantial difference in the ambient temperature, Since last 4-5 months I’m not reducing the temperature of my AC below 28 , Even at 28 I couldn’t keep it for long as the room becomes cooler so I keep for few minutes and turn it off . I really appreciate Neetu ma’am and the panache Team for giving us a perfect solution to the heat related problems we experienced.
The result after applying cool tops from panache is you can see the smiling faces of our team after applying the coating system from panache .
This was an old shed so we had a direct roofing installed, no Insulation. We were very much clear after the discussion with Panache team that we should go for cool Tops coating instead insulation so the result is you can see the smiling faces of our team after applying the coating system from panache #GoGreenwithCoolTops
We took the temperature measurement of outside and inside premises. We noticed a good amount like you can say minimum 6 to 8 Deg C temperature difference.
Looking at the Indian climatic condition during summers, where the temperatures were going too high and whenever it goes up to the peak level, the temperature in the factory shop floor rises affecting the efficiency of the workers. We had a thought in our mind that is there any way to control the temperature, then we came across the Panache company and got in touch with them, after explaining them our problem they came to visit our factory. The team is very committed and technically competent to give us the exact solution for the temperature reduction at the factory. We noticed minimum 6 to 8 °C temperature difference. Thereafter, we received positive feedback from the workers so we decided to go ahead with another project in our office premises. As far as execution is concerned, Panache are experts in this domain. They even contacted us after completion of our installation and ensured that we were satisfied with the workmanship. If someone really wishes to reduce temperature in their premises, I would highly recommend Cool Tops coating from panache – I wish them best of luck for their future projects!
Their prices and services are definitely worth the solution given & treatment done with complete transparency.
I have hired Panache services for the waterproofing & Cooling Treatment on one of the roofs of Parul University premises. Their prices and services are definitely worth the solution given & treatment done with complete transparency. I can definitely recommend them to organizations & people looking for thermal comfort along with waterproofing solutions also.
Totally satisfied by the service received.
I am very impressed by their work on how they provide customized solutions for every problem we have & every task they take up.
The Indoor Temperature has decreased to almost 5 °C. Cool Tops provides Cool Buildings without ACs.
In one of our projects, we had a requirement where AC was not viable and people working under that premises were very much disturbed. To solve that problem, we have consulted Panache for the solution. Panache has provided the full proof solution and after the completion of the Cool Tops Installation, we were much relieved. The indoor temperature has decreased to almost 5 degrees. I could say Cool Tops provide Cool buildings without AC.
The experience for the quality of products with consistency is very appreciable.
I am an engineer & contractor taking turnkey projects. We have used Panache’s various waterproofing products & I recommend Panache's Cool Tops, the special 5 coat system which gives thermal comfort with sustainable performance. The experience for the quality of products with consistency is very appreciable.
I really appreciate their efforts for perfection & sound knowledge of the technology.
We have met the Panache Team from one of our friend’s references who have already taken the services. I must say, they are very professional in what they do. I really appreciate their efforts for perfection & sound knowledge of the technology.
A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.
The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings
An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.