Insulated Wall Texture for Exterior Walls

Insulmix Wall Texture

Insulmix Wrap Texture is ready-to-apply insulated, decorative & protective architectural paste type texture for application on exterior plastered wall surfaces.

It comes in off-white, white & grey colour and is applied on to the surface with a trowel in 3 to 4 mm thickness. The surface when scratched with trowel makes different patterns depending upon the trowel movement and the quartz size. The surface after drying can be primed and painted as per customer’s choice.

U Value: 0.923 W/m2.K     Sp. Gravity: 1.6          pH: 8 to 9



Powder Packet to be mixed with Water: 2Kg, 5kg, 50Kg


15 – 20 sq. ft. / Kg with thickness of 2 to 3 mm 


Application Area

Exterior Walls

RCC Walls


Applications (Procedure)

  1. Exterior Walls
  2. Interior Walls ( Avoid walls where too much drilling is to be done)

Related Products

Related Products

Request Your Assessment


A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.

The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings

An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.