FAP Roofing System

In FAP waterproofing, the fabric is reinforced along with the use of waterproofing 2 K chemicals Hi Seal slurry liquid & hi Seal slurry powder or cement. The on-site emulsion is made by these 2 K waterproofing chemicals and fabric reinforced for strong binding and bearing the expansion-contraction of the substrate and bridging the cracks. 

K Value: 0.098 Elongation: 200%



Powder Packet to be mixed with Water:

2Kg, 5kg, 50Kg


20sq ft / kg



Application Area

  • Above RCC

  • Podium

  • W/C, sunk areas

  • Utility Area, 

  • Balconies

  • Terrace Garden

  • Existing cemented/ china mosaic Roofs

  • Reflective Roofs

  • Slant Cemented/Metal Roofs 

  • Expansion joints

  • Roof retrofitting

  • Kitchen – Sinks

  • Toilet
  • Decks
  • Decks/Podium/Swimming pools/Overhead /Water tanks/Underground Water tanks
  • Terrace – Flat / Slant/Exterior Walls/Expansion Joints/Basements/Retaining Walls/Water Treatment Plants/Sewage Treatment Plants/Bridges
  • Dams/Railway & Subway Systems/Marine Cargo Ports & Docks/River Locks/Channels & Concrete Dykes/Parking Structures & Lots /Tunnel

Applications Procedure

FAP Waterproofing ( Fabric Applied Protective Waterproofing)

  • Surface preparation 
  • Fabric or Fibre mess laying with priming
  • Preparation of Product Mix 
  • Coating
  • Finishing and submission of the surface.
Waterproofing System civil Panache

Related Products

Related Products

Request Your Assessment


A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.

The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings

An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.