Flexible Waterproofing Compound

High Seal Slurry

It is a white milky compound acrylic latex polymeric additive. It forms a dusty grey-colored coating when applied with grey cement. Upon adding cement and water it forms a water‐based protective elastomeric waterproof coating.

Dry to touch: 30 min.

Full Cure Time: 12 – 48 hrs.

Elongation: up to 200%



1Lt., 5Lt. Bottle, 20kg Bucket


80 sq ft per Kg/ coat (May vary as per the porosity/ roughness of substrate)


Application Area




Applications Procedure

In order to prepare the right composition, one should follow these steps:

  1. Take 2 kg of Cement.
  2. Make a smooth paste of cement with 400-500 ml of water using a spatula and stirrer.
  3. Mix 1kg of hi seal slurry liquid to the above mixture with the help of a stirrer.
  4. Hi seal slurry Solution should be used within an hour after mixing.

Related Products

Related Products

Request Your Assessment


A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.

The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings

An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.