Hi-Seal Powder Mix is light grey coloured single component polymerized powder. It is the powder component of the 2 Component waterproofing system. It forms a dusty grey colored flexible film when mixed with Hi Seal Slurry, the Liquid Solution.
When Hi-Seal Powder Mix is added to Hi Seal Slurry Liquid it forms a water-based protective elastomeric waterproof coating.
1. Waterproofing building roofs.
2. Minor and major vertical or horizontal cracks
of all masonry, concretes etc.
3. Apply over bathroom flooring before tiles
4. Apply in areas where water leakages occur
such as basements, swimming pool,
underground tanks etc.
5. Use on roof in addition with Mx Cool Coat
for best results.
6. Apply as a sandwich layer on RCC.
A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.
The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings
An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.