Lacquer is the finishing topcoat that closes out the Wood Care sequence, sitting over stabilising, priming, sealing, and toning. It protects the wood without trapping moisture in it when applied correctly, and is available in matt, semi-matt, or gloss sheen depending on the look you want.
Protection – Seals without trapping moisture
Sheen Options – Matt, semi-matt, or gloss
Durability – Sets life of full finish
Furniture
Flooring
Joinery
Carboy and Buckets
(5kg, 10kg, 20kg)
20sq ft / kg
It’s the final step, applied after stabilising, priming, sealing, and toning – the protective topcoat that closes out the sequence.
Matt, semi-matt, or gloss, depending on the look you want for the finished surface.
Not when applied correctly, as the final coat over a properly prepared and sealed surface – it protects without trapping moisture underneath.
Latest Blogs
For an exposed RCC roof slab, the three viable RCC slab insulation material formats are rigid XPS board, spray-applied PU...
Read More
For a naturally ventilated, non-air-conditioned building, apply cool roof coating first. It reduces solar heat absorption at the roof surface,...
Read More
The decision to pursue a cool roof is usually made early in a project, often at concept stage, once a...
Read More
Search for “top-rated cool roof coating brands in India” and you will find lists ranking manufacturers by adjectives rather than...
Read More
A roof heat reduction coating does not perform the same job on a home in Ahmedabad as it does on...
Read More
Every building envelope consultant eventually faces the same specification question: does this project need insulation on the roof, on the...
Read More
Every summer, the gap between a building’s roof surface temperature and the surrounding air widens across Indian cities. Concrete terraces...
Read More
Every April, a familiar search pattern spikes across Indian cities: “how to cool roof in summer.” It shows up on...
Read More
Every April, a familiar search pattern spikes across Indian cities: “how to cool roof in summer.” It shows up on...
Read More
Every architect working on a rated green building eventually hits the same wall. The client wants IGBC or LEED points....
Read More
Walk onto almost any RCC terrace in India that is more than five years old and you will find the...
Read More
Walk into any hardware store or paint dealership in an Indian city between March and June, and you’ll hear the...
Read More
Anyone who has climbed onto an Indian terrace at 3 pm in May knows the sensation: the concrete feels hot...
Read More
Solar panels lose efficiency the moment they get hot. Every rooftop solar installer knows this trade-off: the same sun that...
Read More
Reflecting Coatings A reflective, or “cool,” coating does one job: it stops a roof from absorbing solar radiation in the...
Read More
Staying Cool in a Changing Climate India’s heat problem isn’t a future scenario — it’s a current one. Several states...
Read More
Cooling Down Solar Rooftop solar installers spend most of their planning time on panel selection, tilt angle and inverter sizing...
Read More
“Green infrastructure” covers a wide range of interventions in Indian policy right now — urban forests, permeable pavements, reflective roofing,...
Read More
“Sustainable building materials” often gets framed as a materials-sourcing question — recycled content, embodied carbon, where something was mined or...
Read More
The Power of Nature India’s summer heat isn’t a slow-moving trend anymore — it’s been formally classified as a disaster...
Read More
Cooler Pavements for Cooler Cities Roofs get most of the attention in the cool-surface conversation, but pavements, cycle tracks and...
Read More
Get Free Audits
Get Free Quote